|
||
Misc. Sealers & Hardware | Boyesen Reeds | Troubleshooting |
OMC Powerhead Bolts and Stainless Steel Tilt Tubes |
||||
Pistons | Rings | Bearings | Cooling System | Bolts and Tilt Tubes |
Gaskets&Seals | Fuel System | Electric System | Lower Gear Case | Crank Shafts & Rods |
OMC Powerhead Bolts and Stainless Steel Tilt Tubes |
||||
Product Type | Fits | Description | Part Number | |
Powerhead Mounting Bolts | V4 & V6 X-Flow 1979 and later | 6 5-1/4" Bolts; 2 1" Bolts; 4 5/16" Nuts and 9 5/16" Lock Washer | 350 | |
Powerhead Mounting Bolts | 2Cyl 74-85 & 3 Cyl. 74-93 | 6 3-1/4" long bolts, 6 5/16" lock washers & 1 nut; stainless steal | 351 | |
Powerhead Mounting Bolts | - | Stainless Steal; 6 3-1/2" (5/16" x 18); 6 5/16" lock washer, 1 nut | 351-1 | |
Powerhead Mounting Bolts | 40&50HP 74-93 | 8 3-1/4" long bolts, 8 5/16" washers &1 nut; stainless steal | 352 | |
Powerhead Mounting Bolts | all V6 Looper | 6 5-1/2" long bolts,2 2-1/4" med bolts, 4 1-1/4" short bolts, 12 3/8" washers, 5 5/16" & 1 nut; stainless steal | 353 | |
Powerhead Mounting Bolts | 1986 & later 3 Cyl. | 6 3-34" bolts; 6 3/8" lock washer; 1 nut | 354 | |
Powerhead Mounting Bolts | V4 Looper | 6 5-1/2" long bolts, 2 1-1/2" med bolts, 2 1-1/4"short bolts, 13 washers and 3 nuts | 357 | |
Powerhead Mounting Bolts | Sixty degree V4 and V6 Eagle fitch FFI | 6 large bolts; 4 medium bolts, 2 small bolts and 10 washers | 358 | |
Lower Bearing Cover Bolts | Crossflow only | O-Rings included, 4 to pack | 123 | |
Lower Bearing Cover Bolts | Looper only | 4 bolts with"o" rings; stainless steal; oe 332590 | 126 | |
Lower Bearing Cap Bolts | Crossflow and looper | 8 bolts and 8 washerdto a pack, X-flow and Looper | 456 | |
Rod Bolt | Looper | 4, 6, 8 crl, ficht 3.8L; 3/8" bolt. torque spec 57 ft.lb oe346044 | RB2000 | |
Rod Bolt | Crossflow and sixty degree Eagle and Ficht FFI | 2,3,4,6,8 Cyl. oe 308186 | RB5000 | |
Rod Bolt | Looper | Fits 4, 6, & 8 Cyl. oe 330081; 5/16" 42 ft. lb. | RB6000 | |
Stainless Steal Tilt Tube | 3, 4, & 6 Cyl. | 1.0" O.D. x 12-1/16" long | STT-2 | |
Stainless Steal Tilt Tube | 3 and 4 Cyl. | 7/8" O.D. x 12-7/8" long | STT-4 | |
Pitch Stainless Steal Jam Nut | - | 1.0" x 14 | SLN-2 | |
Pitch Stainless Steal Lock Nut | - | 7/8" x 14 | SLN-1 | |
Pitch Stainless Steal Jam Nut | - | 7/8" x 14 | SLN-3 | |
Tilt Tube Bushing | - | oe: 321035 | VTT-B | |
Tilt Tube Thrust Washer | - | oe: 910992 | VTT-TW |