OMC Upper Crankshaft Bearing

OMC Upper Crank Bearings
^{m= 1970-77; l= 4040s will not fit in some caged Bearings.; k=5/8 Wrist Pin; j=Use the WP15-1 (Bearing conversion Kit) when replacing the older 5/8" wrist pin with a new 3/4" wrist pin.} ^{When installing the 495 upper bearing in upper cap, DO NOT use a hammer. Instead, heat up the cap assembly and the old bearing will fall out. While the cap is still hot slide the new bearing back into place and allow to cool.}
Model	Year	Cyl.	Upper Crank Bearing
9.9-15	1974-80	2	-
9.9-15	1981-87	2	-
18 HP	1960-68	2	-
18 HP	1970-73	2	2749
20 HP	1981-84	2	2748
20 HP	1985-97	2	2799
25 HP	1977-80	2	2748
25 HP	1981-84	2	2748
25 HP	1985-97	2	2799
28 HP	1987-97	2	2799
30 HP	1984	2	2748
30 HP	1985-97	2	2799
33 HP	1965-70	2	-
35 HP	1976-80	2	2748
35 HP	1981-84	2	2748
35 HP	1985-97	2	2799
40 HP	1960-76	2	900
40 HP	1981-97	2	900
45 HP	1985-97	2	900
48 HP	1987-97	2	900
50 HP	1971-73	2	900
50 HP	1974-97	2	900
55 HP	1968-69	3	900
55 HP	1976-97	2	900
40-60 HP	2004-UP	2	5268
60 HP	1970-71	3	900
60 HP	1980-85	2	900
60 HP	1986-97	3	900
65 HP	1972-73	3	900
65 HP	1984-97	3	900
70 HP	1974-75	3	900
70 HP	1976-97	3	900
75 HP	1976-97	3	900
75-90 HP	2004-UP	3	5268
85 HP	1979-80	4	495
88 HP	1987-97	4	495
90 HP	1964-65	4	495
90 HP	1981-94	4	495
90 HP 60 Degree	1995-2004	⁴	⁰⁵⁰
^{100 HP}	^1966-72	⁴	⁴⁹⁵
^{100 HP}	^1984-97	⁴	⁴⁹⁵
^{110 HP}	¹⁹⁷⁹	⁴	⁴⁹⁵
^{110 HP}	^1986-97	⁴	⁴⁹⁵
^{115 HP}	¹⁹⁷³	⁴	⁴⁹⁵
^{115 HP}	^1974-79	⁴	⁴⁹⁵
^{115 HP}	^1980-94	⁴	⁴⁹⁵
^{115 HP} 60 Degree	^1995-2004	⁴	⁰⁵⁰
^120HP	^1985-97	⁴	⁴⁹⁵
^{125 HP}	^1971-72	⁴	⁴⁹⁵
^{135 HP}	^1973-76	⁴	⁴⁹⁵
^{140 HP}	^1977-84	⁴	⁴⁹⁵
^{140 HP}	^1985-96	⁴	⁴⁹⁵
^{150 HP}	^1979-90	⁶	⁴⁹⁵
^{150 HP} 60 Degree	^1991-2004	⁶	⁰⁵⁰
^{155 HP}	^1984-91	⁶	⁴⁹⁵
^{175 HP}	^1977-90	⁶	⁴⁹⁵
^{175 HP} 60 Degree	^1991-2004	⁶	⁰⁵⁰
^{185 HP}	^1984-85	⁶	⁴⁹⁵
^{200 HP}	^1976-83	⁶	⁴⁹⁵
^{200 HP}	^1985-97	⁶	⁴⁹⁵
^{225 HP}	^1985-97	⁶	⁴⁹⁵
^{235 HP}	^1978-85	⁶	⁴⁹⁵
^{275 HP}	^1985-97	⁸	⁴⁹⁵
^{300 HP}	^1985-97	⁸	⁴⁹⁵

View Order	OMC / Johnson / Evinrude	Check Out

Sealers & Hardware	Boyesen Power Reeds	Troubleshooting


OMC Upper Crank Bearings
Rod Bearing Needles Only		Wrist Pin Bearing	Rod Bearing with Retainer

Lower Crank Bearing	Upper Crank Bearing		Split Sleeve

Center Main Bearings:	Rollers with Retainer		Ring, Roller & Retainer